§ 19-408. Same; form and contents.

(a)

The subdivision plat submitted for final approval shall be clearly and legibly drawn. The agent shall advise the subdivider on the required scale of the proposed final plat and plans, and the sheet size required.

In addition to the requirements of the preliminary plat, the final plat shall include the following:

(1)

A blank oblong space four (4) inches by seven (7) inches shall be reserved for the use of the approving authority.

(2)

Certificates signed by the surveyor or engineer, setting forth the source of title of the owners of the land subdivided and the place of record of the last instrument in the chain of title.

(3)

A statement to the effect that the subdivision, as it appears on this plat, is with the free consent and in accordance with the desires of the owners, proprietors and trustees, if any, and shall be duly acknowledged before some officer authorized to take acknowledgments of deeds.

(4)

When the subdivision consists of land acquired from more than one (1) source of title, the outlines of the various tracts shall be indicated by dash lines, and identification of the respective tracts shall be placed on the plat.

(5)

The accurate location and dimensions by bearings and distances with all curve data on all lots and street lines and centerlines of street; boundaries of all proposed or existing easements, parks, school sites or other public areas; the number and area of all building sites; all existing public and private streets, their names, numbers and widths; existing utilities and those to be provided, such as sanitary sewers, storm drains, water mains, manholes and underground conduits, including their size and type; watercourses and their names; names of owners and their property lines; both within the boundaries of the subdivision and adjoining such boundaries.

(6)

Distances and bearings must balance and close with an accuracy of not less than one (1) in ten thousand (10,000). All dimensions shall be shown in feet and decimal parts of feet.

(7)

The data of all curves along the street frontages shall be shown in detail at the curve or in a curve data table containing the following: Delta, radius, arc, and tangent, chord and chord bearings.

( Ord. of 05-12-2019(1) , 5-21-19)

( Ord. of 05-12-2019(1) , 5-21-19)