§ 25-393. Area regulations.

(a)

Minimum lot size:

(1)

To be considered as a planned commercial development, a project's area must include five (5) or more contiguous acres, none of which can be under water or within a flowage easement.

(2)

The minimum permitted size of any PCD district or of any lot, parcel or tract within the district shall be subject to approval by the local health department.

(3)

The procedure for addition to a PCD district shall be the same as if an original application were filed.

(b)

Maximum density:

(1)

In commercial areas, there are no minimum lot area/size, minimum lot width, or floor area requirements except as provided herein under special circumstances and/or as may be required by the board of supervisors as a part of the approval of the concept plan for the project.

(2)

In commercial areas, maximum lot coverage shall be determined through the concept plan approval process but shall not exceed seventy-five (75) percent unless specifically approved by the board of supervisors as a deviation to these regulations.

(3)

Areas devoted to residential use shall follow the area, width and lot coverage regulations of section 25-282, Residential Multi-family District, unless a deviation to those regulations is specifically approved by the board of supervisors as provided for in section 25-402 of these regulations.

(Res. No. 29-10-99, 10-19-99)

(Res. No. 29-10-99, 10-19-99)