§ 8-102. Application for installation.

(a)

Every individual, business or organization which installs an alarm system within Franklin County that meets the definition in section 8-101 shall be required to obtain a permit to operate prior to installation. The permit shall identify all necessary information regarding the premises, location, contact names, telephone numbers, addresses, directions and other information needed by emergency personnel in order to carry out their respective duties. Whenever a permit is issued, it shall be the responsibility of the owner of the system to maintain any and all components associated with that alarm system. Additionally, each system owner shall notify the department of public safety's communications division of any changes in information or use which would affect the response to an alarm. Failure to do so could result in revocation of permit to operate.

(b)

Automatic dialing devices which transmit voice information will not be permitted to terminate at the PSAP.

(c)

The department of public safety's communications division shall be responsible to carryout the provisions of all sections of this article regarding the installation and procedures for automatic fire and burglar alarm systems.

(Res. No. 15-12-90, 12-17-90; Res. No. 20-03-92, 3-17-92)

(Res. No. 15-12-90, 12-17-90; Res. No. 20-03-92, 3-17-92)